How to Make a DIY Roman Blind

How to Make a DIY Roman Blind

When Mum and Dad visited us for my daughter’s birthday, I jumped at the chance to team up with Mum and work on a project together. I thought making a simple Roman blind for my kitchen would be a great way to glean from Mum many years of sewing knowledge … while at the same time getting a great blind for my kitchen! However, as always we tried to pack too much into one visit, and Mum had to leave for home before we finished. Before she left, we gathered all the supplies I would need and made a plan. I’m on my own now!

How to Make a DIY Roman Blind | www.honeyandroses.com

I made my blind to hang on the inside of the kitchen window frame. The window is large, measuring 1800mm by 1000mm. Make sure your measurements are precise … measure twice, cut once. You’ll also need to make sure everything is cut even and square. Apart from that, if you have basic sewing skills this was a moderately simple project – it just took time and patience.

What you will need:

  • Fabric (width of window plus hem)
  • Lining (width of window)
  • Thread to match the fabric
  • 2 x L-Shaped brackets
  • Wooden batten 42x19mm (width of the window)
  • Thin wooden dowelling 8mm (width 30mm less than blind width)
  • Velcro (width of wooden baton)
  • Doubled-sided tape
  • Ribbon / fabric strips (or Roman blind tape)
  • 12mm plastic rings
  • Nylon cord
  • Screw eyelets
  • Wall cleat for cord
  • Cord tassel/weight
  • Pencil
  • Ruler

Step-by-Step:

Step 1.

  • Measure the window.
  • Cut the wooden baton just shy the width of the window. Allow a few extra millimetres on either end for the L-Shaped bracket.
  • Use double sided sticky tape to attach the loop side of the velcro to the baton.
  • Staple the velcro to make secure.

How to Make a DIY Roman Blind | www.honeyandroses.com

Step 2.

  • Cut the lining exactly the same size as the window frame. Ensure it is square.
  • Cut the fabric the size of the window frame, plus an extra 120mm (5″) to the length and width for the hem.
  • Create the hem by folding over the fabric twice until it measures the same as the window (or lining). Ensure it is square. Press.

How to Make a DIY Roman Blind | www.honeyandroses.com

My fabric wasn’t wide enough for the width of the window, so I sewed 3 pieces of fabric together. I made the middle piece the widest and the 2 side panels smaller. I started with a “rough” cut, allowing for more than I need in case the fabric “moved” when I sewed all 3 pieces together. After sewing and pressing, I then cut the fabric to the required size.

Step 3.

  • Turn the fabric right side up and unfold the hem.
  • At the top, place the fluffy end of the velcro across the middle crease towards the top of the fold.
  • Sew around all 4 sides of the velcro.

How to Make a DIY Roman Blind | www.honeyandroses.com

Step 4.

  • Lay the lining on the wrong side of the fabric. Ensure it is smooth and square.
  • Fold back the hem and pin.
  • Fold the corner in to create a mitred corner.
  • Sew all the way around the hem.

How to Make a DIY Roman Blind | www.honeyandroses.com

Step 5.

  • Position the thin wooden dowels across the width of the blind. The width of your dowels should measure about 30mm (1.2″) less than blind.
  • I made the bottom end of the blind not as big as the folds, measuring 150mm (6″). Each fold was 200mm (8″).
  • Draw a line cross the lining with a pencil where the rod will go. Make sure it is square.
  • Place the ribbon or fabric strips (roman blind tape if you have some) across the blind where your rod will go. Ensure the ribbon or fabric strips are wide enough to insert the rods. I used left over lining.

How to Make a DIY Roman Blind | www.honeyandroses.com

  • Sew across both lengths of the fabric strips, leaving both ends open.
  • Insert the rod and hand sew the ends closed.
  • Hand sew on plastic rings.

How to Make a DIY Roman Blind | www.honeyandroses.com

Step 6.

  • Attach the L-Shaped brackets to the inside of the window frame.
  • Screw the eyelets along the length of the baton (I attached 4 eye hooks).

How to Make a DIY Roman Blind | www.honeyandroses.com

Step 7.

  • Work out which side of the window you want your cleat.
  • Measure out your nylon cord. For each drop you’ll need the 2 x length by 1 x width of the blind.
  • Take the cord and tie it to the bottom ring. Thread the cord up through each ring until you reach the top.
  • Lay the baton near the top, velcro side down. Thread the cord through the eyelets all the way the the end.
  • Repeat for each cord. Tie a loose knot to secure the loose cords.

How to Make a DIY Roman Blind | www.honeyandroses.com

Step 8.

  • Attached wooden batten to the L-shaped brackets.
  • Stretch the blind across the baton. Smoothing out and ensure velcro is secure.

How to Make a DIY Roman Blind | www.honeyandroses.com

  • Making sure the end cords are even. Place the cord tassel/weight onto the end of the cords.
  • Secure the cleat to the window frame well above child-height for safety.
  • Pull the blind up and tie cords in a figure of eight around the cleat.

How to Make a DIY Roman Blind | www.honeyandroses.com

After a bit of tweaking (I added an extra screw eyelet at the end), I’m pretty happy with my first attempt at making a blind. There were no great disasters (if you don’t count Paul breaking a drill-bit off in the wall!).

How to Make a DIY Roman Blind | www.honeyandroses.com

This is a very wide window and while I took my time, I can see that my rods are not 100% square. I don’t think this detracts too much from the overall look. But it does drive home the importance of ensuring your measurements are square.

How to Make a DIY Roman Blind | www.honeyandroses.com

How to Make a DIY Roman Blind | www.honeyandroses.com

I also seem to have a slight ripple affect happening … I’m not sure if this is because I didn’t keep enough tension on the fabric when I was sewing it (or perhaps I had too much!). Either way, this project has really inspired me to do some more sewing around the home … perhaps some new cushion covers for my kitchen chairs.

How to Make a DIY Roman Blind | www.honeyandroses.com

For some great inspiration and guidance, please check out this step-by-step youtube tutorial from Debbie Shore.

Blind safety:

It’s imperative that blind cords are secured in a safe manner, the ACCC fact sheet provides more information.

For more sewing inspiration, please visit my Pinterest board “Sewing Ideas & Inspiration”

Also Sharing:

Your Turn To Shine, Think and Make Thursday, Grace At Home, Home Sweet Home, Creativity UnleashedShabbilicious Friday, Foodie Friday and Everything Else, Feathered Nest FridayThe Inspiration Gallery, The Painted Drawer, The Pin Junkie, Home Sweet Home, Frugal Friday, Link Party Palooza,  The Creative CollectionDIY InspiredBest DIY Projects And Recipe Party, Saturday Sparks, Share It One More Time, A Bouquet of Talent, Found & Foraged, Sunday’s At Home, That DIY Party, Nifty Thrifty Sunday, Amaze Me Monday, Something To Talk About, August Before and After, Tweak It Tuesday, Metamorphosis Monday, Inspire Me Monday, Tutorial & Tips Party, Show and Share, One Project At A Time, The Scoop, Made By You Monday, Hit Me With Your Best Shot, Wow Us Wednesday, Dream. Create. Inspire., Be Inspired, Work It Wednesday

11 responses

  1. Pingback: Think and Make Thursday Link Party #43

  2. Fabulous and detailed tutorial. One day, I promise myself, I shall do this! Featuring tonight on The Painted Drawer Link Party and thanks for sharing!

    Like

  3. I really like this Roman Blind Tutorial. I’ve actually made these before using a pattern, but this tutorial seems pretty straight forward. I’m gonna have to give it a try in my office when I get around to remodeling that space. Thanks for sharing!

    Like

  4. I love Roman shades – pretty and practical! Featured you at Be Inspired this morning. Thanks so much for sharing!

    Like

The Curators Collection

... Making Broken Beautiful

Saw Nail and Paint

Lovingly refinished furniture, vintage and thrifted home decor, urban farming and city chickens

The Vintage Nest

Making life sweeter one project at a time

Lost & Found

I'm a DIY blogger. I love flipping furniture, working with fusion mineral paint, milk paint, and chalk paint, and sharing the treasures I find while being an antique dealer.

Start at Home

Making life sweeter one project at a time

ShayRenovation

Making life sweeter one project at a time

The Chelsea Project

Creating A Classic Southern Home

City Farmhouse

Living a Modern Country Life One Project at a Time

{nifty thrifty things}

{:en}creating nifty, thrifty and creative things{:de}schöne Dinge & mehr..{:}

Dandelion Patina

Making life sweeter one project at a time

Maison de Pax

Making life sweeter one project at a time

Knick of Time

Vintage Farmhouse Living

Littlegreenshed | UK Lifestyle & Travel Blog, featuring food, interiors, travel and family fun.

A lifestyle & travel blog written by Lou Archell, a writer, photographer and mum-of-two. Littlegreenshed features; travel & adventure both near and far, botanical inspiration and practical advice on simple living.

Faded Charm

Making life sweeter one project at a time

FARMHOUSE 40

Making life sweeter one project at a time

%d bloggers like this: